Need it to fold?
If you need garage or bridge clearance, or you trailer regularly, the answer is simple: choose the SG600. It's the only folding model Stryker builds.
See the SG600
The Stryker Buyer's Guide
Which Stryker T-Top Is Right for Your Boat?
Compare the SG300, SG600, and SG900 by fit, folding capability, offshore strength, and real-world use case, then go straight to the right product page.
How Wide Is Your Center Console?
Measure the widest points of your center console. This is the fastest way to narrow down the right T-top model before you compare features.
Every Stryker is Universal-Fit
The SG300 fits consoles 18″ to 48″ wide. The SG600 and SG900 extend to 50″. Every model ships with an adjustable base designed to fit virtually any center console boat built in the last 50 years.
Stryker fits this entire range
Console width, widest point
18"
50"
Dimensions at a Glance
The numbers that decide fit and storage: console width range, installed height, and canopy size for every model. Full measured drawings for all three models are on the T-Top dimensions and measurements page.
Use Case Shortcut
Three simple questions. The answer usually tells you which model to start with.
No folding needed?
For lighter use and the lowest price, choose the SG300. For offshore conditions or heavy accessory loads, choose the SG900.
Compare BothStill not sure?
The safest pick for most setups is the SG600. It's our most popular model for a reason: folding capability, strong frame, balanced price.
See the SG600Model Comparison Matrix
Match the model to your budget, your build, and the water you run.
Three T-Tops. One Right For You.
Click through to the product page for specs, finish options, and accessory pairings.
SG300
The lowest-cost Stryker. Built for lighter recreational use on consoles up to 48″ wide, with the same OEM-grade 6061-T6 aluminum and Sunbrella canopy as the rest of the line.
- ✓Budget-friendly starting point
- ✓Standard frame, simple setup
- ✓Best for lighter accessory loads
- ✓Fixed (non-folding) design
★ Most Popular
Folding Model
SG600
The right answer for most Stryker buyers. Folds down for garage storage, trailering, and low-bridge clearance. Reinforced frame handles moderate offshore use and a full accessory load.
- ✓Folds for clearance and storage
- ✓Reinforced frame, OEM welds
- ✓Quick-release knobs available
- ✓Safest recommendation if you're unsure
SG900
The flagship. Built around 2.5″ tubing for maximum rigidity, engineered for serious offshore conditions and heavy accessory loads: radar, lights, boxes, antennas.
- ✓2.5″ tubing for maximum rigidity
- ✓Rated for heavy offshore conditions
- ✓Optional QuickSilver powder coat finish
- ✓Handles the heaviest accessory loads
Still Not Sure? Narrow It Down with Real Installs.
Browse over 3,000 customer install photos across nearly 800 builds, sorted by boat make. Review installation guidance and video walkthroughs.
Or talk to a person. Our team in Summerville, SC is on the line Mon-Fri, 9AM-5PM EST, and we've been building T-tops for OEM boat manufacturers since 2007. Tell us your boat and we'll recommend the right model.